MHS GEN 2 4.6L / 5.4L 2V PI Stage 2.5 N/A Camshafts
|Name||2V Stage 2.5 N/A for PI Heads|
|Duration @ .050"||228 / 230|
|Lift||.575" / .550"|
|Lobe Sep Angle||111.5 + 1.5|
|Center Lines||110 / 113|
|Suggested Valve Springs||MHS / PAC .600" Lift Stage 2|
|Valve Reliefs Required?||
No - Modified or Aftermarket Intake Valves Required
No Valve Reliefs Required on 5.4L
The Stage 2.5 N/A Camshafts are a max effort design for stock short block applications. These are the asbolute largest cams that will fit without valve reliefs. They do require either our modified Intake Valves or aftermarket Stainless Steel Intake Valves. The stock Intake Valves have a very thick margin. Our modified Intake Valves have a much thinner margin allowing for a little extra PTV clearance. Complementing bolt ons suggested. Lightning 90mm MAF or similar and 24lb Injectors suggested. 3.73 Gears recommended, 2800 - 3000 Stall for Automatic vehicles. Moderate Lope. Valve Springs required.
- Item Requires Shipping
- 16.0 lbs.
- W30.0000” x H8.0000” x L8.0000”
- Free Shipping!
Total Reviews (0)
Write the First Review!
You must login to post a review.