MHS GEN 2 4.6L / 5.4L 2V PI Stage 2 Blower / Nitrous Camshafts
|Name||2V Stage 2 Blower / Nitrous for PI Heads|
|Duration @ .050"||228 / 234|
|Lift||.575" / .550"|
|Lobe Sep Angle||114 + 4|
|Center Lines||110 / 118|
|Suggested Valve Springs||MHS / PAC .600" Lift Stage 2|
|Valve Reliefs Required?||No- Modified or Aftermarket Intake Valves Required.|
These are the asbolute largest Blower / Nitrous cams that will fit without valve reliefs. They do require either our modified Intake Valves or aftermarket Stainless Steel Intake Valves. The stock Intake Valves have a very thick margin. Our modified Intake Valves have a much thinner margin allowing for a little extra PTV clearance. Good Cams for an Eaton Swap, KB 1.7 or 2.1L, Vortech V1 or Procharger P1SC with 10 - 12lbs of Boost. Nitrous applications up to 150 HP. Will still work great with Stock PI Intake. Shift Points around 6200 - 6400. Good Drivability, Moderate Lope. Recommended 3.55 - 3.73 Gear and 2600 - 2800 Stall.
- Item Requires Shipping
- 16.0 lbs.
- W30.0000” x H8.0000” x L8.0000”
- Free Shipping!
Total Reviews (0)
Write the First Review!
You must login to post a review.