MHS 4.6L 4V Competition Rod and Piston Combo

Modular Head Shop 4.6L 4V Competition Rod and Piston Combo 

This rod and piston combo is designed for max effort competition 4.6L 4V applications and is the same combo we use in many of our in house builds. An excellent choice for both Turbo and Blower applications. 
Available with your choice of our 300M H-Beam or 300M I-Beam Connecting Rods. 

Piston Specs: 

• MHS-304641
• Manufactured by Wiseco 
• 3.562" Bore - .010" Over 
• -3cc Flat Top / 10.3:1 Compression 
• Full Round 2618 Competition Forging 
• .300" Down Top Ring with Max Ring Land Spacing 
• Lateral Gas Porting for better Top Ring Seal 
• Ceramic Dome Thermal Barrier Coating 
• Spray on Moly Skirt Coating 
• 3D Internal Skirt and Undercrown Mill for Lightening 
• Double Broached Pin Oilers 
• 2.500" x .230" Wall Tool Steel Wrist Pins 
• Custom Total Seal AP Steel 1.2mm x 1.5mm x 3mm Ring Set with Napier 2nd Rings 

Connecting Rod Specs 
Manufactured by Dyers Top Rods for MHS 
Forged, Machined, Heat Treated and Finished in the USA!

Average bobweight with H-Beams - 1752g 
Average bobweight with I-Beams - 1812g 

We are currently stocking this combo in 3.562" (.010" over bore). Other bore sizes would be made to order.
Want to add a crankshaft or send yours in for balancing? Please contact us with any questions.