Cometic MLS Head Gasket for Ford 4.6L / 5.4L 2V / 4V - 95.25mm Bore - Left Side - For Darton Solid Sleeves
We Highly Recommend Cometic MLS Head Gaskets for all Forced Induction Applications. These gaskets have superior sealing and longevity. Available in a variety of thicknesses with the standard thickness being .030" for the 4.6L /5.4L Modular Engines. If you would like a different thickness, you may select it from the drop down menu.
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, itís ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
**If you have a standard 4.6L block (Romeo, Windsor, Teksid, WAP, NEMAK), and you use a stroker kit to achieve 5.0L, this gasket is NOT the one you need. You will need the 92mm Bore Gaskets.
- Item Requires Shipping
- 5.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.