DivisionX 99-04 2V GT High Flow Fuel Rails - Black Anodized
DivisionX 99-04 2V GT High Flow Fuel Rails
OEM positioning, orientation, and size of o-ring seats for injectors.
Robust bolt on mounts for safe and reliable injector seating. Stainless steel mounting hardware included.
Fuel Rail Pressure Sensor Mount. -FRPS bank includes a 1/8" NPT fitting for remote fuel pressure sending units for in car fuel pressure gauges. Optional block-off available for return style systems.
Auxilliary connection bank has provisions for locking down a Kenne Bell restrictor orifice for FRPS replacement without fear of losing restrictor orifice.
Unique low profile design clears inlet of twinscrew superchargers. Overall rail height is the same as the OEM rails WHILE providing a 56% larger bore than the stock fuel rails.
SAE o-ring boss ports (-8 size) on front and back of both rails.
Front of rails is truncated to maximize clearance in the front of the rails. Aft of rails are positioned to maximize flexibility of supply/crossover lines.
These fuel rails are machined from 6061-T6511 from a solid block of aluminum. There are no welds or caulk to fail.
The DivisionX Fuel Rail Fitting kit is an -8an fitting kit which also includes a stock line to aftermarket rail adapter.
Will not fit with Kenne Bell Mammoth Superchargers. Will Fit KB 2.6L and 2.8L Non-Mammoth
- Item Requires Shipping
- 4.0 lbs.
- W4.0000” x H4.0000” x L18.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.