Home - Return to Previous Page
Stage 2 Ported 2V NPI Cylinder Heads
Full Port Job, Tapered Nose Bronze Valve Guides, Stage 2 High Lift Valve Springs, Stainless Steel Valves, Assembled
MHS Stage 2 2V NPI Cylinder Heads
We take stock seasoned NPI head cores, port to our Stage 2 specs, and install our custom tapered nose manganese bronze guides with ultra tight valve stem to guide clearances to improve both oil control and allow an improved performance valve job to be done. The stock head has double to triple the valve guide clearance and thus you have to make the valve job much lower performing. 0.5mm oversized custom stainless steel valves are used to increase the flow. We then go from the stock 2 angle valve job to a performance 5 angle which includes tightening of some of the angles and widening of the others to enhance the flow. Heads also include performance aftermarket valve springs.
Price Includes Cores - Send us your cores and save $100.00
- Stage 2 Port Job
- Bronze Valve Guides
- Performance 5 Angle Valve Job
- Stainless Steel +.5mm Oversize Valves
- Stage 2 .600" Lift Valve Springs
- New Viton Valve Seals
- Brass Freeze Plugs
- CBN Surfacing
- Assembly (Does Not Includes Cams, Rockers, Lash Adjusters)
Stage 3 .550" Lift Valves Springs available as an upgrade. These Springs have been tested to 10,000 RPM. No machining requires and fits with the stock style valve seals. Includes a set of Custom Lightweight Tool Steel Retainers designed specifically for these springs.
- Modular Head Shop
- Item Requires Shipping
- 80.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.