MHS 2V PI Romeo Stage 3 CNC Ported Head / Cam Combo
The MHS Stage 3 CNC Ported PI Heads are a great mix between High Performance Street and Full Race. We start with Late Model 8 Thread Cores, apply our Stage 3 CNC Porting, Hand Blend the Bowls to the Valve Seats, Install our Custom Tapered Nose Bronze Valve Guides, Hone the Guides to Size and Perform our Trick 5 Angle Valve Job. The Stage 3 Valve Job also clearances shrouding areas in the combustion chamber for even more flow. We then Install our Viton Valve Stem Seals, Manley +1mm BeadLoc Single Groove Stainless Steel Valves and Your choice of our Stage 2 or Stage 3 Valve Springs with our Titanium Retainers.
Intake Flow - 227 CFM / Exhaust Flow - 202 CFM
- Stage 3 CNC Porting with Hand Blended Bowls to Valve Seats
- Bronze Valve Guides Installed
- Performance 5 Angle Valve Job - Chamber Clearancing
- Manley +1mm BeadLoc Single Groove Stainless Steel Valves
- Stage 2 PAC Valve Springs or Stage 3 Boost Springs
- Titanium Retainers
- Viton Valve Seals
- Brass Freeze Plugs
- CBN Surfacing for MLS Gaskets
- Any Set of MHS / Bullet Camshafts
- Camshaft Sprockets, Spacers, Washers and New Camshaft Bolts
- Cleaned and Inspected Followers
- Rebuilt Lash Adjusters
- Modified Intake Valves (For Extra PTV Clearance)
- Camshaft Degree
- TFS Billet Adjustable Crank Gears
- Full Assembly
- Item Requires Shipping
- 40.0 lbs.
- W24.0000” x H12.0000” x L12.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.