Intakes
4.6 TFS 2V
5.4 HPS 2V
5.4 Logan sheetmetal 2V car
5.4 Logan sheetmetal 2V truck
 |
New OEM Ford
ported PI intake Item price: $299 Flat rate shipping of $10 on all orders to lower 48 states! Includes OEM Ford intake and thermostat gaskets and mild porting of runner exit to better match typical PI cylinder head porting and/or stock NPI heads. Options:
2- Drill and tap for 2nd cooling sensor for pre 99 installs - $25
3 - NPI swap kit - $89 - includes alternator bracket, steel heater hose beneath intake, water pump o-ring, water pump nipple
|
|
|
6061 custom elbow for Edelbrock Victor Jr Item price: $225 Flat rate shipping of $10 on all orders to lower 48 states! We are now a stocking distributor of 6061 custom intake elbows for the Edelbrock 2V and possibly the Sullivan 4V intake (we need to test fit for throttle cables on the Sullivan) This hand crafted work of art allows use of your stock type 75mm throttle body, JLT or similar CAI, stock IAC, and stock throttle body cables with the Edelbrock intake manifold. Don't waste your money on an adapter plate to reuse an elbow designed for the PI intake, it just doesn't work as good. This makes one of the best intake combos for the 4000-7500 range be it NA, nitrous, turbo or blower. Click the pictures/thumbnails below to see this elbow and its fitment up close and personal.
|
 |
 |
 |
 |
|
|
MHS Billet fuel rail
adaptors for Edelbrock Victor Jr Item price: $169 Flat rate shipping of $10 on all orders to lower 48 states! Allows use of stock or stock type 2V fuel rails to be used on the Victor Jr intake. Otherwise you have to spend about $350 on fuel rails and fitting for the Edelbrock since they are unique. The stock 2V fuel rails have been proven to 700RWHP and mid 10 quarter mile times on gasoline.
|
|
|
Logan custom sheetmetal intake for 4.6 2V Item price: $1499 Flat rate shipping of $10 on all orders to lower 48 states! The absolute best intake manifold for the 4.6 2V. I bought one some time back and liked it so much I became a dealer. Requires cowl hood and Cobra dual blade style throttle body. Call for details.
|
 |
 |
|
ATTENTION ALL
YOU 5.4 2V USERS WANTING A 3500-6500RPM INTAKE We are in talks with a company willing to make a real 3500-6500 cast aluminum intake specifically designed for the 5.4 2V. If interested please email us at info@modularheadshop.com More details can be found on our 5.4 Intake information page. |